Marshall Origin ORI50C

Classic Marshall

The Origin amps use 3x ECC83 preamp valves and 2x EL34 power valves to generate those classic British tones. Gritty and powerful with a strong mid-range presence, these amps can easily cut through the mix for guitar solos or hold down the rhythm section.

Effects Loop & Emulated Output

The Origin amps have got an effects loop for you to run your delays, reverbs and mods into. This is especially handy if you use the drive from the amp. And it’s got an emulated output for silent recording or for running a direct sound to the front of house PA system when playing a gig.

Tilt Control – 2 Preamp Voicings

The Origin amps have got 2x preamps voicings and you can blend between the 2 using the ‘Tilt’ control knob next to the EQ section. The two voicings are Normal and High Treble which you can tailor depending on the type of guitar you’re using. A dark sounding guitar with humbuckers might want more treble for example.

Specifications
General

Model: Origin50C
Range: Origin
Technology: Valve
Channels: 1

Electronics

Output wattage: High power 50W, mid power approx 10W and low power approx 5W
Outputs: Speaker outputs: 3 x 1/4" jack sockets (16Ω load / 8Ω load), DI out (1/4" jack)
Inputs: 1 x 1/4" jack instrument input, footswitch
Controls: Gain, gain boost, tilt, bass, middle, treble, master, presence, powerstem
Effects: None
Effects loop: Yes, Series, Send/Return

Speakers

Speaker configuration: 1x12"
Speaker model: Celestion G12N-60 Midnight 60 (16Ω, 60W)
Unit impedance: 16Ω

Valves

Preamp valves: 3 x ECC83
Power amp valves: 2 x EL34

Accessories

Footswitch: PEDL-90016 included
Cable: Detachable power cable included

Dimensions (Including Feet and Handle)

Weight: 18.2 kg / 40 lbs
Width: 580 mm / 22.8"
Height: 480 mm / 18.9"
Depth: 245 mm / 9.6"